KRINMED / KNOWLEDGE

Knowledge Center

Practical reading for sterilization monitoring and packaging decisions.

Knowledge Center

Heat-seal monitoring: appearance, leakage and strength

Different seal tests answer different questions. Define the test objective before selecting a method.

Read guide ↗

Knowledge Center

Ethylene oxide sterilization: connect the monitoring records

Organize EO process evidence and distinguish indicator response from aeration and residual assessment.

Read guide ↗

EEP Type 1 Steam Process Indicator Label

Knowledge Center

Chemical indicator types: choosing by purpose

Understand the role of indicator types and the questions to ask before specifying a monitoring product.

Read guide ↗

Knowledge Center

Type 5 vs Type 6 chemical indicators

Compare integrating and cycle-specific indicators without treating the type number as a performance score.

Read guide ↗

Knowledge Center

Bowie–Dick and Helix tests: check the intended challenge

Compare test purposes and the documentation needed before selecting a steam-penetration test system.

Read guide ↗

Knowledge Center

Chemical indicator colour failure: what to document

A structured record for an unexpected indicator result, supporting investigation without guessing the cause.

Read guide ↗

Latest Scientific Articles

Bowie-Dick Testing: How to Respond to a Vacuum-Sterilizer Test Failure

A Bowie-Dick test is a daily check of air removal and steam penetration in a vacuum-type or prevacuum steam sterilizer. This guide explains what the test can show, how to…

Read article

Protecting Biological Indicators Before They Enter the Sterilizer

Biological indicators are designed to challenge a sterilization process, but their results can be undermined by poor storage, mishandling, contamination, or weak traceability. This practical framework helps CSSD and quality…

Read article

What Each Sterilization Monitor Can—and Cannot—Tell You

Mechanical, chemical, and biological monitors provide different evidence about a sterilization process. Understanding their distinct roles and limitations helps CSSD teams interpret records, investigate disagreements, and make release decisions without…

Read article

Tabletop Steam Sterilizers: A Practical Monitoring Framework for Outpatient and Dental Settings

A structured monitoring program helps outpatient and dental teams review sterilizer performance, assess indicators, document results, investigate exceptions, and make traceable release decisions.

Read article

How to Select and Place Process Challenge Devices for Steam Sterilization

Process challenge devices are useful only when their design and intended use match the sterilizer, cycle, load, and monitoring question. This practical guide distinguishes air-removal tests from other PCD applications…

Read article

When Sterilization Records Go Offline: A Downtime Framework for CSSD Traceability

Electronic sterilization records can become temporarily unavailable because of network, software, printer, or interface failures. A predefined downtime process helps CSSD teams preserve load identity, monitoring evidence, disposition decisions, and…

Read article

When Sterilization Records Disagree: Classifying the Discrepancy Before Disposition

Mechanical records, chemical indicators, biological indicators, and air-removal tests provide different types of evidence. When their results disagree, classify the discrepancy, place affected loads on hold when required, and apply…

Read article

Preventive Maintenance Programs for Sterilization Equipment: Design and Records

A preventive-maintenance program helps organizations keep sterilization equipment under defined control. This article focuses on equipment-specific planning, role assignments, maintenance records, calibration status, and documentation practices. Detailed decisions about returning…

Read article

Sterilization Packaging: A Focused Framework for Sterilant Access and Package Integrity

Sterilization packaging must support access to the selected process and preserve the sterile barrier afterward. This focused framework helps CSSD teams distinguish packaging-system, process-monitoring, and package-integrity questions without replacing device,…

Read article

Knowledge Center

Heat-seal monitoring: appearance, leakage and strength

Ethylene oxide sterilization: connect the monitoring records

Chemical indicator types: choosing by purpose

Type 5 vs Type 6 chemical indicators

Bowie–Dick and Helix tests: check the intended challenge

Chemical indicator colour failure: what to document

Latest Scientific Articles

Bowie-Dick Testing: How to Respond to a Vacuum-Sterilizer Test Failure

Protecting Biological Indicators Before They Enter the Sterilizer

What Each Sterilization Monitor Can—and Cannot—Tell You

Tabletop Steam Sterilizers: A Practical Monitoring Framework for Outpatient and Dental Settings

How to Select and Place Process Challenge Devices for Steam Sterilization

When Sterilization Records Go Offline: A Downtime Framework for CSSD Traceability

When Sterilization Records Disagree: Classifying the Discrepancy Before Disposition

Preventive Maintenance Programs for Sterilization Equipment: Design and Records

Sterilization Packaging: A Focused Framework for Sterilant Access and Package Integrity

Sterilizer Requalification After Change: A Risk-Based Change-Control Framework

When Air Remains in the Chamber: Investigating Non-Condensable Gas Problems in Steam Sterilization

Rigid Sterilization Containers: A Practical Maintenance and Inspection Framework